Next, attach one set of your 1x4s about 31 inches up the back legs so that they’re aligned with the top of the front legs. After you attach the side cross supports to the legs, you’ll then attach the sides together with the front cross support pieces. It’s best to build the sides first by attaching the side cross supports to the legs. To start, you’ll need to attach the 1x4s on the outside of the legs. This project will be hard to complete on your own if you don’t have good clamps. You’ll need clamps or, if you don’t have any, a friend with a firm grip to help you keep the boards squared up with the frame so your photography light table comes out well structured. Make sure you have plenty of space available as you’ll want to build your photography light table on the floor so it’s easier to keep it stable and steady. If you can, grab a friend to help you with this part of the construction process. Four 24” 1x2s, which will secure the surface to the frame.Five 24” 1x4s, which will be used as the front and back cross supports.Four 42” 1x4s, which will be used as the side cross supports.Two 31” 2x4s, which will be used as the front legs.Two 51” 2x4s, which will be used as the back legs.You’ll need to make the following cuts if you’re making a 24” x 48” light table. Now that you have all of your materials, you’ll need to start making your cuts. Tip – Flex those eco-friendly muscles by locating lumber and lights you already own. Just adjust the measurements accordingly before you start. While this tutorial is for a 24” x 48” DIY light table, you can easily customize it to any size you need. You’ll want to start by making sure you have all of the tools and supplies on the list above. Image Credit: Craftsman Club To get started, you’ll need these tools and supplies: You can even use it as a tracing table for any art projects you may be working on too! With a little bit of time and skill – and the right materials – you can make your very own DIY light table to help you take your photography to the next level, inspired by Craftsman Club. This one addition to your photography arsenal could eliminate the need for expensive lights for your indoor photography. With a little bit of time and skill – and the right materials – you can make your very own DIY light table to help you take your photography to the next level, inspired by Craftsman Club. If you are the do it yourself type, however, you just might be in luck. Unfortunately, many of them are out of the price range of amateur photographers. I know from personal experience how challenging it can be to take photographs on a cloudy day in a house that gets very little natural light.Ī still life photography light table can change all of that. It makes it easy to take photographs in any light situation. One thing that really comes in handy for product or food photography is a still life photography light table. Are you one of those people? Whether it’s simply a personal hobby or you’re learning photography to enhance your business, you’ve probably read a lot of things about what you really need to have to support your photography habit. DIY light tableĪs camera technology improves at a rapid pace and becomes more affordable, more people find themselves getting into the hobby of photography. However, if you like to photograph items for your business, or to sell online, you probably need a few more items to really make your photography pop – and this DIY light table will to just the trick. I've finally added a couple of cross-section sketches to further describe the creative process.If you like to just shoot photography on the go, then all you really need is a good camera and the right lens and filters. It works very well actually.ĮDIT - December 2014. Piece of Plexiglass (any type of sturdy and see-through material works really)Ī small flashlight (or perhaps two for better effect)Ĭonclusion: And yes. Add a small flashlight and voilà! Home made light table! Somewhat improvised perhaps and in the end not very big but it's enough to save two tired arms and a lot of frustrated grunting by the window. Once glued, I dressed the inside of the box with slightly crinkled tin foil. Using an old shoe box for the frame I fitted the sides with cardboard, the cardboard being used to support the sheet of plastic within the box. Not at all coincidentally I had a little project in mind. Getting a wee bit tired of using a window to trace my sketches onto drawing paper I thought: why not build my own light table? Since I had no idea where it came from and no idea about its proper use I "adopted" it. I found this old thick piece of plastic at work (Plexiglass).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |